OPTI-UPS International Corporation.

The PSB Series are the only line interactive pure sinewave UPS designed to meet everyone’s needs. Our full line covers every possible application demand. There are five tower models, from PS800B to PS3000B, and four rack-mount models, from PS1000B-RM to PS3000B-RM.

Every PSB model utilizes digital line interactive technology that incorporates AVR.

AVR: (Automatic Voltage Regulator) Stabilizes all currents from over and under voltages, so that only the most clean and safe currents feed into your equipment.

Every single model is equipped with our full version of OPTI-SAFE Xtreme, UPS control software.

Sine wave: Represents energy entirely concentrated at a single frequency. The more concentrated the energy is the cleaner and safer the current will be. Fluctuations in energy called sags, brownouts and spikes, are harmful to machines and systems.

Features

* Pure sine wave
* LCD display panel
* Software controlled outlets to switch power on/off (PS1000~3000B)
* Higher efficiency
* 4 hours battery recharge time
* 1050 Joules surge energy rating
* Up to 8 battery backup outlets
* RS232 or USB (optional) connectivity
* Cold start from battery
* Smart power management software

Specifications

Model Name	PS800B
Topology	Line-interactive
On-battery Output Waveform	Pure Sine Wave
INPUT
Maximum Capacity	800VA / 560W
Nominal Input Voltage	110/110/120Vac or 220/230/240Vac
Nominal Input Frequency	50Hz / 60Hz Auto Sensing
Input Voltage Range	Rated Voltage +/-25%
Input Short Protection	Circuit Breaker
OUTPUT
Nominal Output Voltage	100/110/115/120 Vac or 208/220/230/240Vac (selectable)
Output Voltage Regulation (DC Mode)	Rated Voltage +/-5%
Transfer Time	4ms (typical)
Start on Battery	Yes
Auto Restart	Yes
Number of Outlets	6 Battery backup (US) 6 Battery backup (IEC)
PROTECTION
Automatic Voltage Regulation (AVR)	Yes
Data Line Surge Protection	RJ11 / RJ45
Surge Energy Rating	1050 Joules
BATTERY
User Replaceable Batteries	12V / 5AH×2
Typical Backup Time (Full / Half load)	3 / 7min
Recharge Time to 90%	< 4 Hours
ADVANCED WARNINGS / DIAGNOSTICS
Front Panel LEDs or LCD	AC mode / Battery mode
Audible Alarms	Battery mode / UPS fault / Overload
COMMUNICATIONS INTERFACE
Communication Port	RS232*
ENVIRONMENTAL
Operation Temperature	0~40℃ / 32~104℉
Storage Temperature	-20~60℃ / -4~140℉
Audible Noise (AC Mode)	< 40dBA
PHYSICAL
Dimensions(Physical /Packing) (L×W×H)	12.28×5X7.68 / 15.35×9.06×11.81 (in) 312×127×195 / 390×230×300 (mm)
Weight (Net / Gross)	23.59 / 25.79 (lbs) 10.7 / 11.7 (kg)
CONFORMANCE
Approvals	UL / cUL; C-Tick, A-Tick; BSMI; CE; GOST-R
Specifications are subject to change without notice.
^ Battery unit is included with PS232 and PS3000B. Battery unit needs to be connected to Master unit before connecting any loads and turning on the UPS
# RS232 and USB model Provides both RS232 and USB connectivity, but only one connectivity can be used at a time. RS232 model provides only RS232 connectivity, but RS232 can be upgraded to USB connectivity through USP-Serial adapter.
* You can purchase RS232 to USB cable.
** Backup time depends on power consumption of equipment attached and on UPS battery capacity. Numbers here are for reference only.