OPTI-UPS International Corporation.

An Online UPS is not a further improvement of the standby technology, but a completely different approach to providing the highest level of power supply. A double-conversion refers to converting the incoming AC power into DC power, and inverting it back to AC power. This ensures the newly reproduced power to be of a quality standard set by UPS, to be completely cleared of all imperfections of the power coming from the AC mains. Regardless of what is going on the AC mains side, the UPS output voltage, frequency and signal purity are kept up to the highest standards. The current flow is absolutely uninterruptible, the transfer time is zero. The UPS can work in pair with diesel generator, and can accommodate additional battery cabinets for a longer backup time.

Beside those, the Durable Series UPS offer a set of essential features that make these UPS a flexible power supply control and power saving tool.

By now the Durable Series UPS perfectly serve their purpose in numerous data processing, medical, banking and other mission critical centres around the globe.

Features

* Zero transfer time (online)
* Smart fan speed control
* Saves more power and minimizes noise
* 4 hours recharge time
* Cold start (DC power on)
* EPO port ready: emergency power off switch
* SNMP card slot available
* Hot swappable / replaceable battery: continuous operation even when battery is being replaced
* Extended battery pack (optional)
* RS232 and USB port
* Full version of OPTI-SAFE Xtreme software

Specifications

Model Name	DS1000B
Topology	True On-Line, Double Conversion
On-battery Output Waveform	Sine Wave
Number of Phase	Single Phase (2W+G)
INPUT
Maximum Capacity	1000VA / 700W
Nominal Input Voltage	100/110/120Vac or 220/230/240Vac
Input Voltage Regulation	80-144Vac or 160-276Vac
Nominal Input Frequency	50Hz / 60Hz Auto Sensing
Input PFC	＞ 0.97@Full load
Input Short Protection	Circuit Breaker
OUTPUT
Nominal Output Voltage	100/110/115/120/127Vac or 208/220/230/240Vac (selectable)
Output Voltage Regulation	Rated Voltage +/-2%
Output T.H.D	＜ 3% T.H.D at Linear Load
High Efficiency Mode (AC to AC)	92%
Crest Factor	3 : 1
Start on Battery	Yes
Auto Restart	Yes
Number of Outlets	6 Battery backup (US) 4 Battery backup (IEC)
PROTECTION
Data Line Surge Protection	RJ11 / RJ45
BATTERY
User Replaceable Batteries	36V / 12V7.2Ah × 3
Typical Backup Time (Full / Half load)	6 / 18 min
Recharge Time to 90%	＜4 Hours
Extended Battery Pack	BP1000
ADVANCED WARNINGS / DIAGNOSTICS
Front Panel LEDs	AC mode / On line / On battery / Bypass / Fault / Overload and 15 UPS Parameters
Audible Alarms	Battery mode / UPS faults / Overload
COMMUNICATION INTERFACE
Communication Port	RS232 and USB
SNMP Manageable	Yes
ENVIRONMENTAL
Operation Temperature	0~40°C / 32~104°F
Storage Temperature	-20~60°C / -4~140°F
Relative Humidity	0~95% humidity, non-condensing
Audible Noise
PHYSICAL
Dimensions (Physical / Packing) (inches)	16.5×6×9.4 / 21.5×11×14
(L×W×H) (mm)	420×152×238 / 545×280×355
Weight (Net / Gross)	36.4 / 40.6 (lbs)　　 16.5 / 18.4 (kg)
Battery Pack (Net / Gross)	21.1 / 22.6 (kg)
Battery Pack Dimensions (Physical / Packing)	16.5×6×9.4 / 21.5×11×14 (inches)
(L×W×H)(mm)	420×152×238 / 545×280×355
CONFORMANCE
EMI / RFI Compatibility	CE; UL/ cUL, C-Tick, A-Tick; GOST-R